About Lintong Covers

Ten years of covers. One factory behind every stitch.

We have made nothing but protective covers for over a decade — household appliance covers, vehicle covers, industrial equipment covers and the composites in between.

Wide view of the sewing hall with 50 stations
01 / The floor

Nothing here is outsourced.

Lintong Covers is the export brand of Hebei Lintong New Material Technology Co., Ltd., based in Nangong, Hebei — the heart of China's automotive textile and felt cluster. Our [5,300+ m²] facility houses pattern-making, cutting, 50 sewing stations, and a QC station where every fabric batch is tested before it reaches the cutting table.

Working inside that cluster matters more than it sounds. Coated fabric, webbing, zippers and reflective tape are all within a few kilometres, so a specification change costs days rather than a month — and a replacement lot can be pulled the same week.

Factory-direct means one thing here: if a batch fails, it does not ship — and you hear about the delay from us before you notice it.

We welcome customer audits on site, or by live video walkthrough of any workstation, any time.

On the two names: Lintong Covers is the brand you will see on this site, on quotes and on invoices. Hebei Lintong New Material Technology Co., Ltd. is the manufacturing and contracting entity that appears on the bill of lading, the certificate of origin and any third-party test report. They are the same company, the same floor, the same people.
FactDetail
Experience10+ years in protective covers
Legal entity registered 2026-10
Facility5,300+ m² · 8 mu site, Nangong, Hebei
Sewing50 stations · 80 staff
Monthly output20,000 pcs
Pattern library130 base patterns
Main markets20+ countries · North America, EU, Middle East
QCBatch testing: water column ≥1000 mm H₂O, spray test 2.0 bar, tear strength, colorfastness
CertificationsISO 9001:2015 · ISO 14001:2015 · ISO 45001:2018 (ZZEC, valid to Nov 2029)
GB 18401 fabric tests — formaldehyde, pH, azo dyes (CNAS lab)
Export termsFOB Ningbo / Tianjin · CIF · DDP
Why the entity date is public: a buyer who checks the registration and finds a brand-new company loses trust instantly. Stating it plainly — experience and entity as two separate facts — is the only version that survives due diligence.
5,300 m²Production floor
50Sewing stations
130Base patterns
7 daysFit sample turnaround
02 / The floor, photographed

What a buyer sees on an audit.

Photos taken in the workshop, not staged. Working hands, real machines, the actual cutting table.

Automated cutting table
Fabric inspection table
Laminated cotton rolls handled by workers
QC Spray Test2.0 bar · PASS
High-pressure spray test on a finished machine cover
Fabric swatch library wall
Shooting list for these five slots: cutting table with fabric spread · a sewing line mid-run · quilting or lamination close-up · QC station testing · pattern room with hanging samples. Natural light, no HDR, no models looking at camera.
03 / Quality control

Five checkpoints before it ships.

A failed batch is cheaper to catch on the cutting table than at your warehouse door.

01

Incoming fabric

Water column, weight per square metre, shade against the approved swatch. Rejected rolls go back to the mill.

Per roll
02

Cutting

First piece measured against the pattern before the run continues. Tolerance ±1 cm unless your spec is tighter.

First piece
03

In-line

Checks at 30% and 70% of the order: seam strength, stitching density, zipper and grommet placement.

30% / 70%
04

Pre-shipment

Full count, measurement of a random sample, packing and label check. Photo report sent before booking.

100% count
Cover passing the 2.0 bar water pressure test, QC sign in English

Tests run per batch

Water column≥ 1000 mm H₂O target, recorded per lot
Tear strengthWarp and weft, per fabric spec
ColorfastnessGrade 4–5, rubbing and light
Zipper cycle5,000+ cycles on door-zipper models
Third-partySGS / Intertek on request, at cost

The batch test sheet travels with the shipment, so the numbers you were quoted are the numbers your customer can check.

04 / Capability

From three measurements to a container.

What we can take on in-house, and what we deliberately do not.

In-house

Pattern-making & grading

CAD grading from 130 base patterns. New blocks developed from a sample or a drawing, not from a photo alone.

In-house

Cutting & sewing

50 stations, dedicated sample room kept separate from bulk so development never queues behind production.

In-house

Branding application

Silk-screen, heat transfer, embroidery, woven and printed labels. Applied on site, so a logo change does not add a week.

Partner

Coating & lamination

Done by two long-term local mills inside the cluster. Fabric is inspected on receipt, and a rejected lot is replaced within the week.

Partner

Third-party testing

SGS or Intertek, arranged against your market's requirement. Reports issued to your company name.

Not offered

Retail distribution

We do not sell on marketplaces and do not compete with our own customers. Your listing stays yours.

Audits & visits

Come and look. Or send someone who will.

On-site audits are welcome with two weeks' notice. If travel is not practical, we run a live video walkthrough — any workstation, any time in the working day, no pre-selected route.

Arrange a visit
WhatsApp